Put your device into the bag and zip it up securely.

Insert the locking pin to secure the bag.

Press the middle [Break Bag] button to begin timer setup.

Use the +/- buttons to adjust the hours, then press the middle button to switch to minutes and adjust accordingly.

Once the correct time is displayed, press the middle button again to confirm.

If you’ve made a mistake, reset the timer by pressing the - button and start again.

The screen will count down from 5…1, and then the bag will lock for the set duration.

The display will go into sleep mode, but you can check the remaining time by pressing any button.

After the set time has elapsed, the lock will unlock for 15 seconds, allowing you to remove the pin.

No problem—just set the timer for 1 minute, and the bag will unlock again when the time is up.